Machines
Common Items in DWX Series
DWX-53DC
DWX-52DC/DCi
- 101C-0000 The milling bur sensor was not found <DWX-52DC/DCi>
- 101F-**** The % milling bur chucking has slipped out. <DWX-52DC/DCi>
- 104F-02** The % axis position has been shifted. <DWX-52DC/DCi>
- Disc Changer Height Adjustment <DWX-52DCi>
- Option/Supplies/Accessories <DWX-52DCi>
- Spindle Unit Replacement ZS-4D <DWX-52DC/DCi>
DWX-52D
- 1006-**** The % axis position has been shifted. <DWX-52D>
- 1018-0000 The chucking sensor was not found <DWX-52D>
- 101C-0000 The milling bur sensor was not found <DWX-52D>
- 101E-**** The % milling bur might be broken <DWX-52D>
- 101F-**** The % milling bur chucking has slipped out. <DWX-52D>
- 102D-0000 1029-0000 102A-0000 The spindle cannot be turned, The spindle experienced overcurrent/an overload <DWX-52D>
DWX-51D
- 1006-**** The % axis position has been shifted. <DWX-51D>
- 101A-0000 The chucking motor experienced excessive current <DWX-51D>
- 101C-0000 The milling bur sensor is not found <DWX-51D>
- Daily Maintenance <DWX-51D>
- Printing Errors/Printer Errors/Cannot connect (output) <DWX-51D>
- Spindle Unit Replacement ZS-4D <DWX-51D>
DWX-4
DWX-42W
- 1000-**** The % limit switch was not found. <DWX-42W>
- 101C-0000 The milling bur sensor was not found. <DWX-42W>
- 1023-0000 to 1028-0000 Milling Data Error <DWX-42W>
- 102A-000* 102B-0000 1029-0000 The spindle experienced overcurrent/an overload <DWX-42W>
- Errors Occur during Automatic Correction <DWX-42W>
- If the spindle still holds the milling bur and becomes stuck somewhere after powering on... <DWX-42W>