If Milling Accuracy Does Not Improve after Automatic Correction <DWX-52D>
- The quality of milling surfaces is poor.
- The milling accuracy is poor.
- The milled output differs in shape from the design.
- The dimensions of the milled output do not match the design.
For the aforementioned defects, try the same treatment as outlined in the article at the URL below.
The margins become thinner than the data. <DWX-52D>
If there are multiple errors due to automatic correction, check the following.
Once automatic correction has started, the message “Please carry out automatic correction” is displayed until it is completed, and milling cannot proceed.
Errors occur during automatic correction <DWX-52D>